Config - Trango Systems TrangoLINK APEX 18 User Manual

RELATED

config

SYNTAX
DEFAULT VALUE
DESCRIPTION
TrangoLINK Apex™ 18 User Manual Rev. 1.0
COS map priority=6, queue=1
Check current CoS settings
(trango-config)# cos
COS scheduling:
Priority 0: COS Queue = 0
Priority 1: COS Queue = 0
Priority 2: COS Queue = 1
Priority 3: COS Queue = 1
Priority 4: COS Queue = 2
Priority 5: COS Queue = 2
Priority 6: COS Queue = 1
Priority 7: COS Queue = 3
Config <export | import | remove | view>
N/A
This command is used to view/remove and transfer
current system configuration file
Export: The option allows the user to create a ASCII file
(config.txt) of the current system configuration, which can
then be tftp from the PC, which the user can edit/print or
import to other system
Import: This option allows the user to push a
configuration file (should be in the format as created by
export) into the system through tftp and then issue the
"config import" command to apply the settings from the
config.txt file to the system.
Tftpd needs to be enabled/disabled as required.
Remove: This option allows removing the current system
configuration and the settings will be reset to factory
defaults.
Section: Appendix A - Command Set Summary
strict
Page 85