Upgrading Firmware; Upgrade Procedures; Figure 30: Windows Start & Telnet - Trango Systems TrangoLINK APEX 18 User Manual

Upgrading Firmware

The firmware on the TrangoLINK APEX can be upgraded through the management
Ethernet port. A firmware release can consist of up to 5 files:
System FPGA Image Firmware File
System OS Image Firmware File
System Firmware File
System PIC Firmware File
System Modem Firmware File
Before beginning the upgrade procedure, be certain that all (sometimes it will be a
subset of the above files) of these files have been downloaded and extracted to an
easily accessible directory on your local hard drive.

Upgrade Procedures

Place the firmware files in an easily accessible directory path on your computer.
Telnet into the radio by Clicking on Start menu then RUN. (Figure 30) The figures use
the default IP address; you must use the correct IP address for the TrangoLINK APEX.
TrangoLINK Apex™ 18 User Manual Rev. 1.0
<idu_fpga_xxyy>
idu_os_xxyy>
<
<idu_fw_xxyy>
<idu_pic_xxyy>
<idu_modem.bin>
Figure 30: Windows Start & Telnet
Section: Chapter 4 - Deployment & Installation Page 55