Model; Mse - Trango Systems TrangoLINK APEX 18 User Manual

EXAMPLE
RELATED

model

SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED

mse

SYNTAX
DEFAULT VALUE
DESCRIPTION
TrangoLINK Apex™ 18 User Manual Rev. 1.0
In remote loopback configuration one radio of the link
needs to be set as "rf_gen" and the other radio has to be
"rf_refl".
Set loopback mode to if
(trango-config)# loopback if
Loopback Mode: if
SUCCESS
To view current loopback setting:
(trango-config)# loopback
Loopback Mode: if
opmode, datapattern
Model
N/A
Display system model and serial numbers
To display the current model/serial of the system
(trango-config)# model
SYS Model: Apex18-1B
SYS serial ID: 2
Version
Mse <duration>
Duration = 1-99sec
Duration = 1sec
Mse command is used to monitor the Mean Square Error
(MSE) of the link. It is used to monitor the link, based on
the specified duration. CLI prompt will not be accessible
while linktest is running
Section: Appendix A - Command Set Summary Page 96