Different Mode Levels; View Mode - Trango Systems TrangoLINK APEX 18 User Manual

Return to more recent commands in the history buffer after recalling commands with the
Up Arrow or Ctrl-P. Repeat the key sequence to recall successively more recent
commands.

Different Mode Levels

View Mode

This is the default node the users log in. This is strictly configuration and stats view only.
No configuration changes can be made at this level
Command List in View Mode
acm
alignment_mode
atpc
atpc_max_power
atpc_step
ber
config
cos
datapattern
date
default_opmode
failover
freq
help
httpd
ibm
ipconfig
license
linktest
loglevel
loopback
model
mse
opmode
power
remark
rps_enable
rssi
rssiled
smart_mode
snmpd
snmptrap
speed
TrangoLINK Apex™ 18 User Manual Rev. 1.0
Display ACM feature status
Display alignment mode status
Display ATPC feature status
Display current ATPC max power
Display ATPC power level step size
Display ber test parameters
Enable Trango configuration mode
Display current status for class of service
Display data source for data pattern
Display time of Day
Display default opmode status
Display failover mode status
Display RF Tx/Rx frequency
Display help command
Display web server (httpd) status
Display current status of inband management
feature
Display radio management port configuration
Check if the license is enable or disable
Display link test parameters (RSSI, MSE, BER)
Display current syslog level
Display loopback Mode
Display system model and serial number
Display MSE (Mean Square Errors) value
Display operation mode status
Display Tx power in dBm
Display product remarks
Display current status of rapid port shutdown
Display RSSI value
Display rssiled status
Display current status of Smart Mode feature
Display SNMP agent daemon (snmpd) status
Display SNMP trap status TEST
Display current modulation and symbol rate(speed)
Section: Appendix A - Command Set Summary Page 72