Interface Specifications - Trango Systems TrangoLINK APEX 18 User Manual

MECHANICAL & ENVIRONMENTAL
Enclosure
Indicators
Dimensions
Weight
Temperature Range
Humidity
Interfaces
Power connector
Redundancy (1+1)
Antenna Connector
* Based on purchasable Option Key. Contact sales for more information.

Interface Specifications

Physical
Interface
Fiber Optical
MM
Fiber Optical
SM
10 Base-T Electrical
100 Base-T Electrical
1000 Base-T Electrical
TrangoLINK Apex™ 18 User Manual Rev. 1.0
Cast Aluminum with RSSI window
2-digit LED "in dBm" RSSI indicator for alignment
12 × 12 × 6.8 inches (height × width × length)
18 lbs
-40° to 122° F (-40° to +50° C)
100% condensing
1 GigaEthernet port, RJ45 (10/100/1000 BaseT)
1 Fiber Optic port (SFP Module required)
1 Ethernet management port, RJ45 (10/100 BaseT)
Power-over-Ethernet / 2 pin Molex connector
6 pin circular
Optional waveguide adapter: WR42 / UBR 220
Bit rate Impedance
1Gb/s N/A
1Gb/s N/A
10 100 Ohm,
Mb/s balanced
100 100 Ohm,
Mb/s balanced
1 Gb/s 100 Ohm,
balanced
Section: Appendix B - Specifications
Line Code Standard
Multi Mode IEEE
802.3
Single Mode IEEE
802.3
Manchester IEEE
4B/5B 802.3
Manchester IEEE
4B/5B 802.3
Manchester IEEE
4B/5B 802.3
Jitter transfer and jitter
tolerance requirement
Compliance
IEEE 802.3
IEEE 802.3
IEEE 802.3
IEEE 802.3
IEEE 802.3
Page 118