Status - Trango Systems TrangoLINK APEX 18 User Manual

EXAMPLE
RELATED

status

SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
TrangoLINK Apex™ 18 User Manual Rev. 1.0
Freq needs to be set before speed can be configured
A one time license key is required to be set for speed >
100Mbps
*After entering the speed settings, save the config by
"save" command and reboot the systems
Set speed channel_bw = 80, modulation = qam256
(trango-config)# speed 5 qam256
symrate: 46.00
modulation: 256QAM
speed: 312.20
bpf: 56
fcc_bw: 80
SUCCESS
Freq, license
Status <modem | pll | port | all | clear>
N/A
Status command is used to display the current status/
Statistics of various elements in the radio.
<Status clear> clears all the counters for the ports
<status all> shows the status for modem.fifo, pll, port
To display the current status and statistics of the radio.
(trango-config)# status all
<------------ Modem Status-------------->
MSE: -34.60 dB
BER: 0.00E+00
FER: 0.00E+00
BER(cumulative): 0.00E+00
FER(cumulative): 0.00E+00
RSSI: -40.40 dBm
Acquire Lock: 1
<------------- PLL Status --------------->
RFM RF PLL: 1
Section: Appendix A - Command Set Summary Page 106