Objects For Monitoring And Control - Trango Systems TrangoLINK APEX 18 User Manual

SNMP
TrangoLINK APEX 18 supports Simple Network Management Protocol (SNMP) for
network management. Network management consists of the following 4 categories:
configuration, accounting, alarm, and monitoring and control. These capabilities allow
the network operator to provide superior services through higher network accessibility
and integrated accounting system. Use of SNMP requires the customer to have already
implemented a NMS or SNMP software package.
The Trango SNMP solution supports MIB-II (system only) and the Trango proprietary
Management Information Base (MIB).
Users interested in using the SNMP functionality should review the entire TrangoLINK
APEX 18 MIB for a complete understanding of its features.
The following is an overview of a few of the more commonly used SNMP objects in the
TrangoLINK APEX 18 system.
If you do not have a copy of the MIB files for your current firmware version, please
contact Trango Technical Support to obtain them.

Objects for Monitoring and Control

GigE Bandwidth Monitoring
• gigeEth1InOctets – Number of octets of payload received on GigE port 1
(copper).
• gigeEth2InOctets – Number of octets of payload received on GigE port 2
(fiber).
• gigeEth1OutOctets – Number of octets of payload transmitted on GigE port 1
(copper).
• gigeEth2OutOctets – Number of octets of payload transmitted on GigE port 2
(fiber).
RF Monitoring
• rfInOctet – Number of octets of payload received on the RF port.
• rfOutOctet – Number of octets of payload transmitted on the RF port.
• rfEthernetInPackets – Number of octets of payload received from the GigE
ports to transmit on RF port.
• rfEthernetOutPackets – Number of octets of payload transmitted to GigE ports
from RF port.
• rfRSSI – The Receive Signal Sensitivity Indicator the unit receives from the
distance end of the link.
TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Chapter 5 - Management Page 60