DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED
temp
SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED
telnetd
SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
TrangoLINK Apex™ 18 User Manual Rev. 1.0
-40dBm
Targetrssi command is used to set the target signal level
expected during the normal operation of the link.
ATPC tracks the tragetrssi.
Set the targetrssi at –45dBm
(trango-config)# targetrssi -45
target rssi: -45.00 dBm
SUCCESS
atpc, rssi
temp
N/A
Temp command is used to display the current system
temperature in Celsius.
To display current temp
(trango-config)# temp
System temperature: 45 celsius
N/A
telnetd <on | off>
ON
Turn on telnetd daemon. Used to enable or disable telnet
access.
Enable tftp server
Section: Appendix A - Command Set Summary
Page 111