EXAMPLE
RELATED
atpc_max_power
SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED
TrangoLINK Apex™ 18 User Manual Rev. 1.0
the "maxatpcpower" and "atpc_step_size".
When ATPC is turned off, user entered power setting is
restored back.
Turn on ATPC
(trango-config)# atpc on
ATPC: on
Check current ATPC configuration
(trango-config)# atpc
ATPC: on
atpc_max_power, atpc_step_size, targetrssi, power
atpc_max_power <0-20>
Default 17
This command is used to set the upper limit on transmit
power during ATPC.
max atpc power setting is used only when ATPC is on.
To set max atpc power
(trango-config)# atpc_max_power 15
ATPC max power: 15.0
Check current ATPC configuration
(trango-config)# atpc_max_power
ATPC max power: 15.0
atpc, atpc_step_size, power, targetrssi
Section: Appendix A - Command Set Summary
Page 81