Utype; Version - Trango Systems TrangoLINK APEX 18 User Manual

DESCRIPTION
EXAMPLE
RELATED

utype

SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED

version

SYNTAX
DEFAULT VALUE
TrangoLINK Apex™ 18 User Manual Rev. 1.0
Uptime is used to display how long the system has been
running, since the last reboot/power cycle.
It shows the current time and uptime.
To display current uptime
(trango-config)# uptime
20:45:58 up 1:49, load average
Date
Utype <standby>
Main
Utype command identifies the current system role.
The valid type in the current release is main. Only the
active unit may use this command to switch the role type.
The command is prohibited when the standby unit is not in
a good condition.
To display current system type
(trango-config)# utype
utype: main
To switch to standby role:
(trango-config)# utype standby
utype: main
failover, sync_state, sync
Version
N/A
Section: Appendix A - Command Set Summary Page 114