RELATED
sync
SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED
sync_state
SYNTAX
DEFAULT VALUE
DESCRIPTION
TrangoLINK Apex™ 18 User Manual Rev. 1.0
IN Port util:
0.0
OUT Port util:
0.0
<------------------- 6. ACM Status --------------------->
ACM mod
MSE(improve)
QPSK
-20.00
16QAM
-21.00
32QAM
-22.30
64QAM
-28.20
128QAM
-31.10
Status
sync
N/A
This command is allowed only on the active unit to initiate
synchronization process with the standby unit.
On detecting the Standby unit the Active unit
synchronized the current system setting with the Standby
unit.
To synchronize with the standby unit
(trango-config)# sync
success
Failover, sync_state
sync_state
N/A
This command is used to display the state of the
synchronization between the Active and the Standby unit
Section: Appendix A - Command Set Summary
100.0
none
100.0
none
MSE(degrade)
Enable
-1.00
enabled
-17.00
enabled
-20.00
enabled
-23.30
enabled
-27.20
enabled
Page 109