Trapip; Uptime - Trango Systems TrangoLINK APEX 18 User Manual

DESCRIPTION
EXAMPLE
RELATED

trapip

SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED

uptime

SYNTAX
DEFAULT VALUE
TrangoLINK Apex™ 18 User Manual Rev. 1.0
Threshold command is used to set rules for monitoring the
system. Whenever the threshold exceeds the
programmed values the desired action is set.
Set RSSI min threshold to –80 and action to send a
snmptrap.
(trango-config)# threshold 0 min -80 3
min = -80
SUCCESS
Snmptrap, snmpd, trapip,
Trapip < manager 1 | 2 ><ipv4 address>
0.0.0.0
Trapip is used to set the ip address of the snmptrap
manager destination. 2 trapip (snmp managers) can be
configured.
Set manager 1 trapip to 10.8.1.32
(trango-config)# trapip 1 10.8.1.32
Trap IP Address: 10.8.1.32
SUCCESS
snmptrap, snmpd
Uptime
N/A
Section: Appendix A - Command Set Summary Page 113