RELATED
save
SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED
smart_mode
SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
TrangoLINK Apex™ 18 User Manual Rev. 1.0
To view rssiled status:
(trango-config)# rssiled
Rssiled: on
Rssi, alignment_mode
save
N/A
Save command is used to save the current system
configuration to the flash, so that system settings are
persistent across reboot/power cycles.
Save command should be used after system setting
change. Otherwise it will be lost after reboot.
Multiple changes can be saved by one save command.
Save current system settings.
(trango-config)# save
New configuration saved
SUCCESS
N/A
smart_mode <on/off>
ON
This configuration will require a reboot command to take
effect.
Disable smart mode
(trango-config)# smart_mode off
smart_mode: on
Section: Appendix A - Command Set Summary
Page 103