Ibm - Trango Systems TrangoLINK APEX 18 User Manual

EXAMPLE
RELATED

ibm

SYNTAX
DEFAULT VALUE
DESCRIPTION
TrangoLINK Apex™ 18 User Manual Rev. 1.0
To turn off httpd:
(trango-config)# httpd off
httpd: off
SUCCESS
To view current httpd status:
(trango-config)# httpd
httpd: off
Ipconfig
Ibm <enable | id | ip >
Ibm enable <on | off>
Ibm id <1-4090>
Ibm ip <valid ip address>
Ibm port <0:copper | 1: fiber>
Enable : on
Id : 1
IP : 10.10.10.1
This command is used to configure the In Band
Management (IBM) channel to manage the system.
Both IBM and the Out of Band Management (OBM) can
be used together. The management VLAN ID can be
configured based on the user requirement from 1-4090.
The IP address for the IBM channel is independent of the
OBM port on the IDU. The 2 IP address needs to be
unique.
"Ibm port" command will take effect only after reboot.
IBM only works through the GigE1 data port on the IDU.
Section: Appendix A - Command Set Summary Page 91