Set Mode; Set Mode Description - Icom IC-7000 Instruction Manual

■ Set mode description

Set mode is used for programming infrequently
changed values or conditions of functions. This trans-
ceiver has a quick set mode, display set mode, timer
set mode and miscellaneous (others) set mode.
• Set mode operation
[AF]
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
• Start up screen
Push
[AF]
momentarily
• Set mode menu
• Quick set mode (p. 123)
q Push [AF(
menu.
w Push [F-1 QS], [F-2 DISP], [F-3 TIME] or [F-4
OTH] to enter the desired set mode.
e Push [F-1 ≤] or [F-2 ≥] to select the desired item.
r Set the desired condition using [DIAL].
• Push [F-4 DEF] for 1 sec. to select a default condition
or value.
t Push [Z(
[DIAL]
• Display set mode (p. 126)
• Time set mode (p. 119)
• Miscellaneous (others) set mode (p. 130)

SET MODE

)] momentarily to enter the set mode
SET
)] twice to exit the set mode.
/
MENU GRP
13
12
13
122