Clock And Timers; Time Set Mode; Set Mode Operation - Icom IC-7000 Instruction Manual

12

CLOCK AND TIMERS

■ Time set mode

This transceiver has a built-in 24-hour clock with
power-off timer function. The clock indication is always
displayed except after pushing [F-INP/ENT] (HM-151).

• Set mode operation

[AF]
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
Year
This item sets the current year.
Date
This item sets the current date.
Time (Now)
This item sets the current time for the built-in 24-hour
clock.
CLOCK2 Function
This item turns the second clock indication ON and
OFF instead of 1st clock.
The clock 2 is convenient to indicate the UTC and
other country's local time, etc.
• Push [F-4 DEF] for 1 sec. to set the default value.
CLOCK2 Offset
This item sets the desired off-set time period for the
clock 2 indication within –24:00 to +24:00 in 5 min.
steps.
• Push [F-4 DEF] for 1 sec. to set the default value.
Auto Power OFF
This item sets the power-off period for automatic shut-
down after the power-on timer has turned power ON.
119
q Push [AF(
menu.
w Push [F-3 TIME] to enter the time set mode.
e Push [F-1 ≤] or [F-2 ≥] to select the desired item.
r Rotate [DIAL] to set or select the desired value or
condition.
• Push [F-4 DEF] for 1 sec. to select a default value or
condition.
t Push [Z(
[DIAL]
Rotate [DIAL], then push [F-3 SET] to set the year.
Rotate [DIAL], then push [F-3 SET] to set the date.
Rotate [DIAL], then push [F-3 SET] to set the time.
ON
The clock 2 is displayed in-
stead of the 1st clock indica-
tion.
± 0:00
(default)
)] momentarily to enter the set mode
SET
)] twice to exit the set mode.
/
MENU GRP
2005
3-15(Tue)
15:00
OFF
The clock 2 does not dis-
play. (default)
+ 9:00
Rotate [DIAL] to set the
time.
60min
Push [F-3 SET] to enter the time.