Display Set Mode; Contrast (Lcd); Bright (Lcd); Lcd Unit Bright - Icom IC-7000 Instruction Manual

■ Display set mode

To adjust the LCD contrast or backlight, wait until
the LCD becomes stable (10 min. or more after turn-
ing power ON). This is an inherent characteristic of
LCDs and LCD backlights and does not indicate a
transceiver malfunction.

1 Contrast (LCD)

This item adjusts the contrast of the LCD from 0% to
100% in 1% steps.

2 Bright (LCD)

This item adjusts the brightness of the LCD from 0%
to 100% in 1% steps.

3 LCD Unit Bright

This item adjusts the brightness of the LCD unit from
0% to 100% in 1% steps.

4 LCD Flicker

This item adjusts the flicker of the LCD from 0% to
100% in 1% steps.
Icom recommends using the default value. But if
you feel the flicker on the LCD, and it is too con-
cerned, you adjust this item.

5 Backlight(Switches)

This item adjusts the brightness of the switches from
0% to 100% in 1% steps.

6 Display Type

This item sets the LCD screen type. There are 3 se-
lectable types: A, B, and C.
SET MODE
4 0 %
40% (default)
7 0 %
70% (default)
4 0 %
40% (default)
6 5 %
65% (default)
5 0 %
50% (default)
A
A-type LCD screen (default)
13
13
126