Speech S-Level; Speech [Mode] Switch; Memopad Numbers; Scan Speed - Icom IC-7000 Instruction Manual

■ Miscellaneous (others) set mode

24 SPEECH S-Level

You can have frequency, mode and signal level an-
nouncement. Signal level announcement can be de-
activated if desired.
When "OFF" is selected, the signal level is not an-
nounced.

25 SPEECH [MODE] Switch

This irem selects the operating mode speech capa-
bility when [MODE] is pushed.
When "ON" is selected, the selected operating mode
is announced at pushing [MODE].

26 Memopad Numbers

This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.

27 SCAN Speed

This item sets the rate at which channels or frequen-
cies are scanned during scan operations. High and
low can be selected.

28 SCAN Resume

This item sets the scan resume function ON and OFF.
"ON" : Scan resumes 10 sec. after stopping on
a signal (or 2 sec. after a signal disap-
per).
"OFF" : Scan does not resume after stopping on
a signal. For the priority watch, setting to
OFF pauses the watch until the signal
disappears and scan resumes.

29 MAIN DIAL Auto TS

This item sets the auto tuning step function. When ro-
tating [DIAL] rapidly, the tuning step automatically
changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fastest)
and LOW (Faster).
(continued)
ON
Signal level announcement
(default)
ON
Operating model announce-
ment with [MODE]
5
5 memo pads
(default)
HIGH
Scan is faster.
(default)
ON
Scan resume function is
ON. (default)
HIGH
Auto tuning step is turned ON.
Fastest tuning step during rapid rotation
(default)
LOW
Auto tuning step is turned ON.
Faster tuning step during rapid rotation
OFF
Auto tuning step is turned OFF
13
SET MODE
OFF
No signal level
announcement
OFF
No operating mode an-
nouncement with [MODE]
(default)
10
10 memo pads
LOW
Scan is slower.
OFF
Scan resume function is
OFF.
.
13
134