Lock Functions; D Dial Lock Function; D Microphone Lock Function; Basic Transmit Operation - Icom IC-7000 Instruction Manual

3
BASIC OPERATION

■ Lock functions

The lock function can only be activated when display-
ing frequency, not in set mode, memory channel list-
ing, or TV display.

D Dial lock function

The dial lock function prevents accidental change
caused by [DIAL].
➥ Push [SPCH/LOCK] for 1 sec. to turn the dial lock
function ON and OFF.
• " " indicator appears while the dial lock function is
activated.

D Microphone lock function

This function locks microphone keypads.
➥ Push [SPCH/LOCK] (microphone) for 1 sec. to
toggle the microphone lock function ON and OFF.
• "MIC LOCK ON" and "MIC LOCK OFF," popup indica-
tors appear, respectively
• [PTT] and [SPCH/LOCK] can be used.
• All keys on the transceiver can be used.

■ Basic transmit operation

D Transmitting

Before transmitting, monitor your selected op-
erating frequency to make sure transmitting
won't cause interference to other stations on
the same frequency. It's good Amateur practice
to listen first, and then, even if nothing is heard,
ask "is the frequency in use" once or twice, be-
fore you begin operating on that frequency.
q Push [PTT] (microphone) to transmit.
• [TX] indicator lights red.
w Release [PTT] (microphone) to return to receive.
37
Appears
[SPCH/LOCK]
SPCH
SPCH TUNER
XFC
/LOCK /LOCK /CALL
MW
V/M
F-2
F-1
1.8 3.5 7
MODE
1 2 3
10 14 18
4 5 6 FIL
21 24 28
GENE
7 8 9
50 . 144 430 F-INP
0 CE ENT
HM-151
SPCH TUNER
XFC
/LOCK /CALL
[PTT]
MW
V/M
F-2
F-1
[TX]
1.8 3.5 7
MODE
1 2 3
10 14 18
4 5 6 FIL
21 24 28
GENE
7 8 9
50 . 144 430 F-INP
0 CE ENT
HM-151
[TX] indicator