Frequency Transferring; D Transferring In Vfo Mode - Icom IC-7000 Instruction Manual

8
MEMORY OPERATION

■ Frequency transferring

The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.

D Transferring in VFO mode

This is useful for transferring programmed contents to
VFO.
q Select the menu M-2.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M-2.
w Push [F-4 V/M] momentarily to select the VFO
mode.
e Push [F-1 MEM] to display the memory channel
contents.
• Memory channel contents appear above the multi-func-
tion key indicator.
r Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
t Select a memory channel with [M-ch].
• " " appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
y Push [F-4 V/M] for 1 sec. to transfer the frequency
and operating mode.
• Transferred frequency and operating mode appear in
the display.
109
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M , S or G (Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from: M - 1 , M - 2 or M - 3
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-1] [F-4]
[EXAMPLE]: Transferring contents of memory 16.
Operating frequency : 21.320 MHz/USB (VFO)
Contents of memory 16 : 14.020 MHz/CW
Either Either
Y Y or Z or Z
V/M
Push for
1 sec.