Memory Clearing; D Memory Clearing Using The Memory Channel List - Icom IC-7000 Instruction Manual

■ Memory clearing

Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select the menu M-2.
w Push [F-4 V/M] momentarily to select the memory
mode.
e Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
r Rotate [M-ch] to select the memory channel to be
cleared.
t Push [F-3 MCL] for 1 sec. to clear the contents.
• The programmed frequency and operating mode dis-
appear and " " appears.
y To return to VFO mode, push [F-4 V/M] again.

D Memory clearing using the memory channel list

q Select the menu M-2.
w Push [F-4 V/M] to select memory mode.
e Push [F-1] (MEM, LST) twice to enter the memory
channel list.
r Push [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
t Rotate [M-ch] to select the memory channel to be
cleared (blanked).
y Push [F-3 MCL] for 1 sec. to clear the contents.
u Push [Z( )] twice to exit the memory
/
MENU GRP
channel list.
MEMORY OPERATION
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-3] [F-4]
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[PBT/M-ch/RIT] indicator
[MENU/GRP] [F-1] [F-3] [F-4]
Programmed frequency
and operating mode
disappear.
8
8
MCL
Push for
1 sec.
MCL
Push for
1 sec.
108