Memo Pads; D Writing Frequencies And Operating Modes Into Memo Pads - Icom IC-7000 Instruction Manual

8
MEMORY OPERATION

■ Memo pads

The transceiver has a memo pad function to store fre-
quency and operating mode for easy write and recall.
The memo pads are separate from memory channels.
The default number of memo pads is 5, however, this
can be increased to 10 in initial set mode if desired
(p. 134).
Memo pads are convenient when you want to memo-
rize a frequency and operating mode temporarily, such
as when you find a DX station in a pile-up or when a
station is busy for a long time and you want to tem-
porarily search for other stations.
Use the transceiver's memo pads instead of relying on
hastily scribbled notes that are easily misplaced.

D Writing frequencies and operating modes into memo pads

q Select the menu S-3.
w Push [F-2 MPW] to program the frequency into a
memo pad.
When you write a 6th frequency and operating mode,
the oldest written frequency and operating mode are
automatically erased to make room for the new set-
tings.
NOTE: Each memo pad must have its own unique
combination of frequency and operating mode;
memo pads having identical settings cannot be
written.
111
[MENU/GRP] [F-2] [F-3]
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M , S or G (Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from: S - 1 , S - 2 or S - 3
Displayed frequency and mode
The oldest written frequency
and mode are erased.
Either Either
Y or Z Y or Z
MPW
Push
MP5
Newest
MP4
MP3
MP2
MP1
Oldest