Voice Recorder Functions; Digital Voice Recorder; Recording A Received Audio; D Basic Recording - Icom IC-7000 Instruction Manual

7

VOICE RECORDER FUNCTIONS

■ Digital voice recorder

The transceiver has digital voice memories, up to 4
channels for transmit, and up to 99 channels for re-
ceive. A maximum message length of 120 sec. can be
recorded into a receive channel (total message length
for all channels of up to 1500 sec.), and a total mes-
sage length of 90 sec. can be recorded in transmit
channels.
Providing a transmission memory is very convenient
for repeated CQ and number transmissions at contest
times, as well as when making consecutive calls in
DX'pedition.

■ Recording a received audio

D Basic recording

q Select the desired frequency and mode.
w Select S-1.
e Push [F-1 VO] to call up the voice recorder menu.
• If the transmit voice memory channels (T1–T4) screen
appears, push [Z(
MENU
select the receive voice memory channel.
• If the voice root menu appears, push [F-1 RX] to select
the receive voice memory menu. The voice recorder
starting menu can be changed in the miscellaneous
(others) set mode.
r Push [F-1 ≤] or [F-2 ≥] to select the new truck or
desired recorded contents to be overwritten.
t Push and hold [ANF/• REC] for 1 sec. to start
recording while receiving a signal.
• " " appears and the recording timer counts up.
• The operating frequency, mode and current time are
programmed as the memory names automatically.
• Previously recorded contents are cleared, if overwrit-
ten.
y Push and hold [ANF/• REC] for 1 sec. again to
stop recording.
• " " disappears.
• Recording is automatically terminated after 120 sec. or
when a total of the recorded time becomes 1500 sec.
u Push [Z(
/
MENU GRP
mode.
CONVENIENT
MIC Memo FUNCTION
While recordig a received audio, speak into micro-
phone (without pushing [PTT]) to record your com-
ment, impression or some information with recorded
audio.
This function can be activate in the voice set mode.
(p. 101)
95
)] then push [F-1 RX] to
/
GRP
)] twice to exit the voice recoder
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M , S or G (Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from: S - 1 , S - 2 or S - 3
[MENU/GRP] [F-1] [F-2] [ANF/•REC]
The voice recoder stores the received audio in 15
sec. blocks. Thus the total recording time is re-
duced by 15 sec. each time recording is stopped.
Either Either
Y Y or Z or Z