Programming A Memory Name For Transmit - Icom IC-7000 Instruction Manual

7
VOICE RECORDER FUNCTIONS

■ Programming a memory name for transmit

Memory channels can be tagged with alphanumeric
names of up to 5 characters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
and spaces can be used. (See the step t below.)
q Record a message as described at previous page.
w Call up the voice memory recording mode as de-
scribed in steps q to e (see the instructions for
recording at previous page).
e Push [F-1 ≤] or [F-2 ≥] to select the desired voice
memory.
r Push [F-4 NAM] to enter memory name edit condi-
tion.
• A cursor appears and blinks.
• Memory channel names of no-recorded channels
cannnot be selected.
t Push [Y(
/
MENU GRP
sired character group.
• [ABC], [abc], [123] or [etc] indicates the capital letters,
small letters, numerals or symbols, respectively
y Input the desired character by rotating [DIAL].
• Push [F-1 Å] or [F-2 Ç] for cursor movement.
• Push [F-3 DEL] to delete the selected character.
• Push [F-4 SPC] to input a space.
• Pushing the HM-151's keypad, [0]–[9], can also enter
numerals.
u Push [Z(
/
MENU GRP
• The cursor disappears.
i Repeat steps e to y to program another voice
memory's name, if desired.
o Push [Z(
/
MENU GRP
ory screen.
99
)] several times to select the de-
)] to input and set the name.
)] twice to exit the voice mem-
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M , S or G (Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from: S - 1 , S - 2 or S - 3
_
@)
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
Either Either
Y Y or Z or Z