D Editing A Keyer Memory - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

D Editing a keyer memory

The contents of the memory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW se-
quences for often-used CW sentences, contest num-
ber, etc. Total capacity of the memory keyer is 55
characters per memory channel.
[F-1]
[MENU/GRP]
Memory channel select
Selected
character
• Pre-programmed contents
CH
M1 CQ TEST CQ TEST DE ICOM ICOM TEST
M2 UR 5NN✽ BK
M3 CFM TU
M4 QRZ?
47
[F-2] [F-3] [F-4]
Contents
• Programming contents
q Push [MODE] to select CW mode.
w Select S-1.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times to
select the menu S-1.
e Push [F-2 KEY] then [Z(
keyer root menu.
• If the keyer root menu appears, skip pushing
[Z( )]. The keyer starting menu can be
/
MENU GRP
changed in the miscellaneous (others) set mode.
r Push [F-2 EDT] to enter the keyer edit menu.
t Push [F-1 M1] — [F-4 M4] to select the desired
keyer memory channel.
y Push [Y(
)] several times to select the de-
/
MENU GRP
sired character group ([ABC], [123] or [etc]).
• Selectable characters (with [DIAL]);
Key selection
ABC
123
etc
NOTE:
" " is used to transmit a following word with no
^
space such as . Put "
AR
such as ^AR, and the CW prosign "
with no space.
✱
" " is used to insert the CW contest number.
The contest number automatically increments
by 1. This function is only available for one
memory keyer channel at a time. Memory
keyer channel M2 uses "
u Select the desired character by rotating [DIAL] or
by pushing the band key (HM-151) for the incre-
menting trigger memory number input.
• Push [F-1 Å] or [F-2 Ç] for cursor movement.
• Push [F-3 DEL] to delete the selected character.
• Push [F-4 SPC] to input a space.
• "✱" is for contact numbers and can be input for the
count up trigger channel (" " appears).
i Repeat steps y and u until the desired contents
are input.
o Push [Z( )] to return to memory channel
/
MENU GRP
selection mode, then select the next memory chan-
nel and repeat steps y and i for character input,
if desired.
!0 Push [Z( )] twice to exit the keyer edit
/
MENU GRP
mode.
)] to select the
/
MENU GRP
Editable characters
A to Z (capital leters)
0 to 9 (numbers)
/ ? ^ . , @ ✽
" before a text string
^
" is sent
AR
✱
" by default.