D Convenient Functions For Transmit - Icom IC-7000 Instruction Manual

Convenient functions for receive (continued)
• DSP noise reduction (p. 81)
➥ Push [NR/LEV] to turn the DSP noise reduction
ON and OFF.
• " " appears when the DSP noise reduction is set to
ON.
➥ Push [NR/LEV] for 1 sec. to enter the noise re-
duction level set mode, then rotate [DIAL] to ad-
just the DSP noise reduction level.
• Manual notch filter (pgs. 82, 83)
➥ Push [MNF/ADJ] to turn the manual notch filter
ON and OFF.
• " " appears when the manual notch filter is set to
ON.
➥ Push [MNF/ADJ] for 1 sec. to enter the manual
notch filter set mode.
• Push [F-2 NF1], [F-3 NF2] to select the notch filter,
push [F-4 NW] to set the filter width, rotate [DIAL] to
set the notch frequency.

D Convenient functions for transmit

• Transmit quality monitor (p. 89)
➥ Push [AF( )], then [F-4 OTH] to enter the mis-
SET
cellaneous (others) set mode. Select an item with
[F-1 ≤]/[F-2 ≥], then rotate [DIAL] to turn the
monitor function ON and OFF.
• VOX (voice operated transmit) (p. 85)
➥ While "M
3" is selected, push [F-1 VOX] to turn
-
the VOX function ON and OFF.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times
to select the menu M-3.
• " " appears when the VOX function is set to ON.
➥ While "M-3" is selected, push [F-1 VOX] for 1
sec. to enter the VOX set mode.
• Push [F-1 ≤]/[F-2 ≥] to select an item.
• Rotate [DIAL] to set the value/conditions.
RECEIVE AND TRANSMIT
• Auto notch filter (p. 82)
➥ Push [ANF/• REC] to turn the auto notch filter ON
and OFF.
• " " appears when the auto notch filter is set to ON.
• VSC (voice squelch control) (p. 84)
➥ While "S-1" is selected, push [F-4 VSC] to turn
the VSC function ON and OFF.
• " " appears when VSC function is set to ON.
4
4
58