D Tone Scan Operation - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

D Tone scan operation

By monitoring a signal that is being transmitted on a
repeater input frequency, you can determine the tone
frequency necessary to access a repeater.
q
During tone squelch, DTCS squelch or repeater
operation ("
played), select M-3.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M-3.
w Push [F-3 TON] for 1 sec. to enter the FM tone set
mode.
e Push [F-2 SCN] to toggle the tone scan operation
ON and OFF.
• When a matched tone or code is detected, tone scan
automatically stops, the matched tone or code is dis-
played and the tone or code setting is automatically ad-
justed accordingly.
r Push [Z(
/
MENU GRP
During tone squelch operation.
61
," " " or " " is dis-
)] to exit the FM tone set mode.
During DTCS squelch operation.
[MENU/GRP] [F-2] [F-3]
During repeater operation.