Memory Operation; D Calling Up A Frequency From A Memo Pad - Icom IC-7000 Instruction Manual

D Calling up a frequency from a memo pad

You can simply call up the desired frequency and op-
erating mode of a memo pad by pushing [F-3 MPR] in
the S-3 menu.
• Make sure S-3 is selected in advance.
• Both VFO and memory modes can be used.
• The frequency and operating mode are called up, starting
from the most recently written.
When you call up a frequency and an operating mode
from memo pads with [F-3 MPR], the previously dis-
played frequency and operating mode are automati-
cally stored in a temporary pad. The frequency and
operating mode in the temporary pad can be recalled
by pushing [F-3 MPR] one or more times.
NOTE: If you change the frequency or operating
mode called up from a memo pad, the frequency
and operating mode in the temporary pad are
erased.

MEMORY OPERATION

VFO or memory mode
MEMO PADS
MPR
Push
8
MPR
Push
MP5
MP4
8
MP3
MP2
MP1
112