Baud; Device Base - AMX Color Active-Matrix LCD Instruction Manual

Figure 105
Protected Setup page
Figure 106
BAUD button
Note
Make sure to match the baud
transmission rate for the ex-
ternal RS-232 device.
70 Touch Panel Program Reference

Baud

The BAUD button (Figure 106) sets the baud rate for the DB-9 connector at the rear of
the touch panel. The baud rate is automatically set to 1,200 when you activate the
MOUSE button. The RS-232 communication automatically defaults to Figure 106 if
you disable the MOUSE ON button.
BAUD
Press the UP and DN buttons to set the data communication speed
for the touch panel's RS-232 (DB-9) port. Available baud rates are 300, 600,
1200, 2400, 4800, 9600, 19.2 KB, and 38.4 KB.

Device base

Press the DEVICE BASE button (Figure 107) to open a keypad and set the base ad-
dress for the touch panel. The base address range is from1 through 255.
Color Active-Matrix LCD Mini-Touch Panels