Unpacking - Intermec EasyCoder 501 XP Installation & Operation Manual

Chapter 3
Installation

Unpacking

1
/. Type and quantity depends
on area of distribution. May be
omitted in some areas.
16
Before you install the printer, examine the delivery for possible
damage or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
• The label on the printer's rear plate gives the voltage, the part
number and the serial number.
• Check that any options you ordered are included.
• Check that all the accessories are included in the delivery.
In addition to any separately ordered options, the box should
contain:
- Intermec EasyCoder 501 XP printer
- Adapter for 3" paper roll core
- Paper guide for label slack absorber
- Power cord (at least one depending on model)
- Quality check card
- Short strip of labels
- Start pack of thermal transfer ribbon
- Cleaning card
- User's Guide (multilingual)
- Installation & Operation manual
• Check that the power cord is appropriate for the local standard. The
printer works within 100 – 240 V AC, 50 – 60 Hz.
European type
230V mains plug
If the printer has been damaged in any way during transportation,
complain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.
Intermec EasyCoder 501 XP – Installation & Operation Ed. 4
1
US/Canadian type
115V mains plug
1
GB type
230V mains plug