Safety Requirements; Product Labelling - Intermec EasyCoder 501 XP Installation & Operation Manual

Chapter 1 Introduction
Safety
Requirements

Product Labelling

8
Intermec assumes no responsibility as regards fulfi lling the CE
Directive if the printer is handled, modifi ed or installed in any way
other than that described in Intermec's manuals.
Caution
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side and front covers
are open, so ensure that the covers are closed before you
operate the printer.
• Do not open the left-hand cover. Dangerous voltage!
• Do not put your fi ngers inside the print mechanism when
the power is on.
• Do not open the optional paper cutter when the power is on.
• Place the printer on an even surface which can support its weight of
13 kgs (29 lbs) plus supplies and possible options.
• Do not spray the printer with water. If using a hose to clean the
premises in an industrial environment, remove the printer or
protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using
a cleaning card.
The machine sign is attached to the printer's rear plate and contains
information on type, model and serial number as well as mains
voltage. It also shows various signs of approval.
Intermec EasyCoder 501 XP – Installation & Operation Ed. 4