Installation Unpacking - Intermec EasyCoder E4 Installation & Operation Manual

Chapter 2
Installation
Unpacking
6
Before you install the printer, examine the delivery for possible
damage or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
• The label on the base of the printer gives the voltage, the article
number and the serial number. The part number indicates the
build options.
• Check that any options you ordered are included.
• Check that all the accessories are included in the delivery. In
addition to any specially ordered options, the box should contain:
- Intermec EasyCoder E4 LinerLess printer
- Power cord
- Quality check card
- Cleaning card
- Starter pack of labels
- Set of manuals
- Application software on CD-ROM
- Parallel interface cable
• Check that the power cord and the voltage are appropriate for the
local standard.
European type
230V mains plug
If the printer has been damaged in any way during transportation,
complain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it imme-
diately to the distributor.
Intermec EasyCoder E4 LinerLess – Installation & Operation Ed. 1
US/Canadian type
115V mains plug
GB type
230V mains plug