Table 40-28: Ad-Based Tel-To-Ip Routing Rule Configuration Examples - AudioCodes Mediant 8000 Installation, Operation & Maintenance Manual

Installation & Operation Manual
The table below shows an example for configuring AD-based Tel-to-IP routing rules in
the Outbound IP Routing Table:

Table 40-28: AD-Based Tel-to-IP Routing Rule Configuration Examples

Index
1 PRIVATE:
2 PBX:
3 OCS:
4 MOBILE:
5 LDAP_ERR
6 *
7 *
The table below shows an example for configuring AD-based SBC routing rules in the
IP-to-IP Routing Table:
Table 40-29: AD-Based SBC IP-to-IP Routing Rule Configuration Examples
Destination Username
Index
1 PRIVATE:
2 PBX:
3 OCS:
4 MOBILE:
5 LDAP_ERR
6 *
7 *
The configured routing rule example is explained below:
Rule 1: Sends call to private telephone line (at 10.33.45.60) upon successful AD

query result for the private attribute.
Rule 2: Sends call to IP PBX (at 10.33.45.65) upon successful AD query result

for the PBX attribute.
Rule 3: Sends call to Lync client (i.e., Mediation Server at 10.33.45.68) upon

successful AD query result for the Lync attribute.
Rule 4: Sends call to user's mobile phone number (to PSTN through the device's

IP address at 10.33.45.100) upon successful AD query result for the Mobile
attribute.
Rule 5: Sends call to IP address of device (10.33.45.80) if AD query failure (e.g.,

no response from LDAP server or attribute not found).
Version 6.6
Dest. Phone Prefix
Prefix
Dest Address
Dest Address
Dest Address
Dest Address
Dest Address
LDAP
Dest Address
Dest. IP Address
10.33.45.60
10.33.45.65
10.33.45.68
10.33.45.100
10.33.45.80
LDAP
10.33.45.72
Destination Type
647
40. General SIP Configuration
Destination
Address
10.33.45.60
10.33.45.65
10.33.45.68
10.33.45.100
10.33.45.80
10.33.45.72
October 2014