Analog Outputs
The Ultra1500 contains two analog outputs that can be configured through
Ultraware software to represent internal drive variables. Figure 2.7 shows the
configuration of the analog outputs. The following table provides a description
of the analog outputs.
Figure 2.7
Analog Output Configuration
+5V
Output values can vary during power-up until the specified
IMPORTANT
power supply voltage is reached.
The following table provides a description of the analog output specifications.
Parameter
Description
Number of states that the output signal is divided
Resolution
(to the number of bits)
into, which is 2
Output
Current capability of the output.
Current
Output
Signal Range Range of the output voltage.
Ultra1500 Connector Data
Ultra1500 Drive
5 kΩ
10 kΩ
0.033 µF
5 kΩ
220 Ω
-
+
.
Publication 2092-UM001D-EN-P — July 2005
2-11
AOUT 1
Minimum
Maximum
8 Bits
—
-10 mA
+10 mA
-10V
+10V