Parameter Groupings; Group 0 Parameters - Allen-Bradley Ultra1500 2092-DA1 User Manual

Parameter Groupings

3. Press the ENTER key to display the current value of the parameter.
4. Modify the current value of the parameter with the directional keys, and
save the modified value in memory by pressing the SET key.
5. Press the ENTER key a second time to return to the Set Parameter
display, where you can modify parameter settings.
For example: Enter the Set Parameter mode by pressing the MODE key
(The text message Pr-x.xx indicates the Set Parameter mode is active).
Select a parameter and navigate through the parameter using the
navigational keys (the active digit flashes). Press the ENTER key to display
the current value of the parameter. Modify the parameter setting by using
the LEFT and RIGHT key to move between digits, and the UP or
DOWN key to increment or decrement the flashing parameter value.
Press and hold the SET key to save the new parameter setting (the display
momentarily blanks to indicate the setting is saved). Lastly press ENTER
to return to the Set Parameter display.
This section defines the parameters controlling drive operation. Parameters are
grouped by the category they reside in.

Group 0 Parameters

Group 0 Parameters provide basic drive system and I/O settings.
Pr-0.00 Operation Modes
Range:
Default:
Ultraware Link:
Ultra1500 Operator Interface
Normal Operating
Value
Mode
1 Follower
2 Analog Velocity Input
3 Analog Current Input
4 Analog Velocity Input
5 Analog Current Input
6 Analog Current Input
7 Preset Velocity
8 Preset Velocity
9 Preset Velocity
10 Preset Velocity
11 Dual Current Control
2
Main/Override
Publication 2092-UM001D-EN-P — July 2005
D-9
Override Operating
Mode
Follower
Analog Velocity Input
Analog Current Input
Follower
Follower
Analog Velocity Input
Preset Velocity
Follower
Analog Velocity Input
Analog Current Input
Dual Current Control