6-2
Maintaining and Troubleshooting Your Ultra1500
Maintaining Your Ultra1500
Drive
Publication 2092-UM001D-EN-P — July 2005
The Ultra1500 is designed to function with a minimum of maintenance.
To maintain your Ultra1500 drive:
•
Clean the drive periodically, using an OSHA approved nozzle that
provides compressed air under low pressure, less than 20 kPa (30 psi), to
blow the exterior surface and the vents clean.
•
Visually inspect all cables for abrasion.
•
Cable connectors should be inspected for proper seating and signal
continuity end-to-end.
•
If installed, replace the battery as described on page 5-17.