Ultra1500 Power Specifications; Main Input Power; Control Input Power; Input Power Connector - Allen-Bradley Ultra1500 2092-DA1 User Manual

A-2 Specifications and Dimensions
Ultra1500 Power
Specifications
Drives
1
Input Voltage
2
Input Current
Input Frequency
2
Inrush Current
Power Cycling
Delay before Drive Enable
1 Specifications are for nominal voltage. The absolute limits are +/-10% (180–265 Vrms).
2 Power initialization requires a short period of inrush current. Dual element time delay (slow blow) fuses are recommended in Fuse and Contactor
Specifications on page A-4.
Publication 2092-UM001D-EN-P — July 2005
The following sections provide power specifications for the Ultra1500.

Ultra1500 Power Specifications

The tables below lists general power specifications and requirements for the
Ultra1500 drives (2092-DAx).

Main Input Power

2092-DA1 2092-DA2
200–240 Vrms, 1φ
3.3 Arms 5.5 Arms
47–63 Hz
200 Apeak, maximum
0.5 power cycles/minute maximum
500ms, minimum (after main power is applied)

Control Input Power

1
Input Voltage
2
Input Current
Input Frequency
2
Inrush Current
1 Specifications are for nominal voltage. The absolute limits are +/-10% (180–265 Vrms).
2 Power initialization requires a short period of inrush current. Dual element time delay (slow blow) fuses are
recommended in Fuse and Contactor Specifications on page A-4.

Input Power Connector

Description
Manufacturer
Acceptable Wire Gauge
Operating Tool
Pinout
2092-DA3 2092-DA4
200–240 Vrms, 3φ
8.0 Arms 11.0 Arms
200–240 Vrms, 1φ
2.0 Arms
47–63 Hz
75 Apeak, maximum
Pluggable cage-clamp, 7.5mm spacing
Wago 231-206/026-000
2
2.5–0.5 mm (14–20 AWG)
Wago 231-131
Refer to Input Power Connectors on page 2-24
2092-DA5
15.0 Arms