Complying With Eu And Ttmra Directives; Ce Emc Directive; C-Tick Emc Directive - Allen-Bradley Ultra1500 2092-DA1 User Manual

1-2 Installing Your Ultra1500
Complying with EU and
TTMRA Directives
Publication 2092-UM001D-EN-P — July 2005
If this product is installed within the European Union (EU) or EEC regions
and has the CE mark, or within the Australian and New Zealand markets and
has the C-Tick mark, the following regulations apply.
Note: Declarations of Conformity (DOCs) to European Union Directives and
Trans-Tasman Mutual Recognition Arrangement (TTMRA) Directives
are available on-line at www.ab.com/certification/ce/docs. The web
site is the authoritative source for verifying compliance and suitability
for use of this and other Rockwell Automation/Allen-Bradley products.

CE EMC Directive

This unit is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) using a technical construction file and the following
standards, in whole or in part:
•
EN 50081-2 EMC - Emission Standard, Part 2 - Industrial Environment
•
EN 50082-2 EMC - Immunity Standard, Part 2 - Industrial Environment
•
EN 61800-3 - Adjustable Speed Electrical Power Drive Systems,
Part 3 - EMC Product Standard including specific test methods
The product described in this manual is intended for use in an industrial
environment.

C-Tick EMC Directive

This unit is tested to meet C-Tick EMC using a technical construction file and
the following standards, in whole or in part:
•
AS/NZS CISPR 11:2002 (Group 1, Class A)
•
Radiocommunications Act: 1992
•
Radiocommunications (Electromagnetic Compatibility) Standard: 1998
•
Radiocommunications (Compliance Labeling - Incidental Emissions)
Notice:1998