Memory/Call Channels; General Description; D Memory Channel Contents - Icom IC-E92D Instruction Manual

■ General description

The IC-E92D has 850 memory channels in the A band, 450
memory channels in the B band, and 2 call channels in each
band. Memory channels in each band include 50 scan edge
memory channels
(25 pairs)
quencies, respectively.
And a total of 26 memory banks, A to Z, are available in
each band for storing groups of frequencies, etc. Up to 100
channels can be assigned into a bank.

D Memory channel contents

The following information can be programmed into memory
channels:
• Operating frequency
(p. 18)
• Operating mode
(p. 21)
• Duplex direction
(+DUP or –DUP)
quency
(p. 32)
• Subaudible tone encoder
DTCS squelch ON/OFF
• Subaudible tone frequency
quency or DTCS code with polarity
• Scan skip information
(p. 87)
• Memory bank
(p. 75)
• Memory name
(p. 77)
• Tuning step
(p. 18)
• Call sign squelch or Digital code squelch*
• Station call sign*
(p. 36)
• RPT1/RPT2 call sign*
(p. 41)
*Available for B band operation only.

MEMORY/CALL CHANNELS

for storage of often-used fre-
with an offset fre-
, tone squelch or
(p. 121)
(p. 124)
, tone squelch fre-
(p. 121)
(pgs. 121, 125)
(p. 124)
CAUTION!
Memory data can be erased by static electricity, electric
transients, etc.
In addition, they can be erased by malfunction and during
repairs.
Therefore, we recommend that memory data be written
down or be saved to a PC using the optional RS-92
.
MOTE CONTROL SOFTWARE
9
1
2
3
4
5
6
-
RE
7
8
9
10
11
12
13
14
15
16
17
18
19
71