Memory Clearing - Icom IC-E92D Instruction Manual

9
MEMORY/CALL CHANNELS

■ Memory clearing

Contents of programmed memories can be cleared (erased),
if desired.
q Push and hold [S.MW](MR) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beeps sound.
• Memory channel number blinks.
• Do not hold [S.MW](MR) for more than 2 sec. otherwise the
memory contents will be copied to VFO.
w Rotate [DIAL] to select the desired memory channel to be
cleared.
e Push [∫](2) or [√](8) to select "CLEAR."
r Push and hold [S.MW](MR) for 1 sec. to clear the con-
tents.
• 3 beeps sound.
• The cleared channel changes to blank channel
• Return to select memory write mode.— Memory channel
number blinks. Push [VFO] to exit select memory write mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
80
VFO mode
FM FM
14 145 870 870
A
PSKIP PSKIP
Push and hold
B
MR
for 1 sec.
S.MW
Enter select memory
write mode.
FM FM
145 010 14 010
r
µ 000 000
BANK BANK :---- :----
MNAME: MNAME:
SKIP :OFF SKIP :OFF
Rotate [DIAL] to select
the desired channel.
145 000 14 000
r
µ 005 005
BANK :---- BANK :----
MNAME: MNAME:
SKIP SKIP :OFF :OFF
2
8
Push or
SCAN
TS
to select CLEAR .
14 145 000 000
µ 005 005
MNAME: MNAME:
SKIP :OFF SKIP :OFF
r CLEAR CLEAR
B
MR
Push and hold
S.MW
for 1 sec. to clear.
r
µ 005 005
BANK BANK :---- :----
MNAME: MNAME:
SKIP :OFF SKIP :OFF
A
VFO
Push .
MHz
FM FM
14 145 870 870
A
PSKIP PSKIP
Return to the VFO mode.