Accessing A Repeater - Icom IC-E92D Instruction Manual

6
REPEATER AND DUPLEX OPERATIONS

■ Accessing a repeater

q Set the receive frequency
w Set the shift direction of the transmit frequency.
+DUP; see p. 32 for details.)
"–DUP"or "+DUP" appears.
FM FM
A A
e Push and hold [TONE](7) for 1 sec. to activate the subau-
dible tone encoder, according to repeater requirements.
• "TONE" appears.
Refer to p. 121 for tone frequency settings.
[SQL]
7
TONE
30
(repeater output frequency)
-DUP -DUP TONE TONE
145300 145300
DSQ
r Push and hold [PTT] to transmit.
.
• The displayed frequency automatically changes to the transmit
(–DUP or
frequency (repeater input frequency).
• If "OFF" appears, check the offset frequency or shift direction.
(p. 31)
While receiving
-DUP -DUP TONE TONE
FM FM
145300 145300
A A
t Release [PTT] to receive.
y Push and hold [SQL] to check whether the other station's
transmit signal can be directly received or not.
While transmitting
-DUP -DUP TONE TONE
FM FM
144700 144700
A
PSKIP PSKI PSKIP PSKI