Transmitting A Dtmf Code; Transmitting From Dtmf Memory Via Keypad - Icom IC-E92D Instruction Manual

13
OTHER FUNCTIONS

■ Transmitting a DTMF code

D Transmitting from DTMF memory
The selected DTMF code is transmitted at each push of the
[SQL] switch while transmitting.
The transmitting speed at which DTMF memories send
individual DTMF characters can be set in "DTMF SPEED"
menu.
(p. 111)
q Set the desired frequency.
w Push and hold [DTMF.M](9) for 1 sec. to enter DTMF
memory.
e Rotate [DIAL]
†
to select the desired DTMF memory chan-
nel.
r Push [ ](5) to set the DTMF memory.
t Push [VFO] to exit DTMF memory.
y While pushing [PTT], push [SQL] to transmit the selected
DTMF code.
[DIAL]
[SQL]
118
(p. 18)
+DUP +DUP DTCS DTCS
FM FM PRIO WX PRIO WX EMR EMR
438 500 43 500
A
MemoName MemoName
PSKIP PSKIP
µ 000 000
5D28AB4 5D28AB4
A
VFO
MHz
The DTMF code is displayed here
9
CS
when transmitting the code.
DTMF.M
D Transmitting from DTMF memory via keypad
The selected DTMF memory can be transmitted via keypad
directly while transmitting. Pushing [1]–[9] or [0] to transmit
DTMF memory channel (Ch01–Ch09 or Ch10) respectively.
q Set the desired frequency.
w Enter "DTMF TX KEY" in DUP/TONE... set mode.
➪
❮MENU screen❯ ❮DUP/TONE...❯
(Push [MENU/ ]) (Rotate [DIAL]
e Rotate [DIAL]
†
to select DTMF transmitting key
(DTMF–M) as below.
DTMF TX KEY DTMF TX KEY
KEY KEY
r
DTMF-M DTMF-M
r Push [ ](5)
(or [ ](4))
mode, and push [MENU/
cation.
t While pushing [PTT], push the desired keys to transmit
the selected DTMF memory.
• [1]–[9] transmits "Ch01"–"Ch09" and [0] transmits "Ch10."
(p. 18)
(p. 112)
➪
❮DTMF TX KEY❯
† ‡
, then push [ ](5) .)
to return to DUP/TONE... set
] to return to frequency indi-