Icom IC-E92D Instruction Manual page 34

5
BASIC OPERATION
D Main band selection
➥ Push [MAIN/DUAL] to select upper side band or lower
side band as the main operating band alternately.
MAIN
DUAL
26
+DUP +DUP DTCS DTCS W PS PS
144 000 14 000
PRIO PRIO
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
43 430 000 000
PRIO PRIO EM EM
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
144 000 14 000
PRIO PRIO
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
43 430 000 000
PRIO PRIO EM EM
µ 000 000
FM FM
D Setting audio volume
The audio level for dualwatch operation can be adjusted
both on upper side band and lower side band simultaneously
(default).
This setting can be set separately for each band in sounds
set mode.
q Push and hold [MAIN/DUAL] for 1 sec. to enter the dual-
watch operation, if necessary.
w Rotate [VOL] to adjust the audio level for the main band.
• If squelch is closed, push and hold [SQL] to verify the audio
level.
• The display shows the volume level while setting.
14 144 000
[VOL]
430 000 43
14 144 000
VOL VOL
430 000 43
Setting for A band (upper side)
144 000 14
430 000 43
VOL VOL
Setting for B band (lower side)
+DUP +DUP DTCS DTCS W PS PS
000
PRIO PRIO
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
000
PRIO PRIO EM EM
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
PRIO PRIO
000 25 25
µ 000 000
+DUP +DUP DTCS DTCS W PS PS
000
PRIO PRIO EM EM
75 75
µ 000 000
FM FM
PS PS
+DUP +DUP DTCS DTCS W
000
PRIO PRIO
25 25
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
PRIO PRIO EM EM
75 75
000
µ 000 000