Power Save; Font Size; Display Backlighting; Lcd Contrast - Icom IC-E92D Instruction Manual

■ Font size

Displayed character size during MENU mode indication in
the function display is selectable from Large and Small.
➪
❮MENU screen❯ ❮DISPLAY❯
(Push [MENU/ ]) (Rotate [DIAL]
NOTE: The set font size is available in menu, DTMF mem-
ory and select memory write screens only.

■ Display backlighting

The transceiver has display backlighting with a 5 sec. timer
for night time operation. The display backlighting can be
turned ON continuously, turned AUTO or turned OFF, if de-
sired.
➪
❮MENU screen❯ ❮DISPLAY❯
(Push [MENU/ ]) (Rotate [DIAL]

■ LCD contrast

The contrast of the LCD can be selected from 16 levels.
➪
❮MENU screen❯ ❮DISPLAY❯
(Push [MENU/ ]) (Rotate [DIAL]
➪
❮FONT SIZE❯
† ‡
, then push [ ](5) .)
➪
❮BACKLIGHT❯
† ‡
, then push [ ](5) .)
➪
❮LCD CONT❯
† ‡
, then push [ ](5) .)
OTHER FUNCTIONS

■ Power save

The power save function reduces the current drain to con-
serve battery power.
The power save duty cycle, the ratio of receive circuit on
to receive circuit off during standby, can be set to auto-
matic1 , 1 : 4
(default) (150 msec. : 600msec.)
, automatic2, in addition stopping the operation of
1200msec.)
a digital block at the DV mode, or OFF with "POWER SAVE"
in set mode.
(p. 96)
➪
❮MENU screen❯ ❮SET MODE❯
(Push [MENU/ ]) (Rotate [DIAL]
• "AUTO1" selects "1:4" duty ratio when receiving no signal for 5
sec., then "1:8" 15 sec. after that.
• "AUTO2" suppresses the consumption of the battery by stopping
the operation of a digital block of the DV mode in addition to the op-
eration of Auto1.
No signal
600 msec.
5 sec.
Circuit ON
Circuit OFF
150 msec.
[DIAL] ↔ [ ](2)/[ ](8)
†
13
, 1 : 8
(150 msec. :
➪
❮POWER SAVE❯
† ‡
, then push [ ](5) .)
1200 msec.
15 sec.
](5) ↔ [ ](6)
‡
[
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
129