Icom IC-80AD Operating Manual

i80AD/E80D DR mode operating guide
■ DR mode operation
Push to enter the DR mode.
Step 1
Accessed repeater (RPT1) selection
Select the access repeater name.
(e.g. HIRANO43)
Step 2
(UR) call sign selection
Select the UR call sign.
Calling a CQ
In the same Area : CQCQCQ
To other Area : Repeater name
(e.g. IKOMA43)
To call CQ in the same
zone, or a different zone,
the settings are the same.
Step 3
Linked repeater (RPT2) selection
Select the linked repeater.
In the same Area : NOT USE
In the same Zone : Repeater name (e.g. NARA43)
To a different Zone : GW
Push and hold PTT to transmit, release to receive.
■ Storing Received call sign (UR, RPT1 or RPT2)
This is a way to copy the call record contents ("CALLER,"
"RXRPT1" and "RXRPT2") into the call sign memory "UR" and
the repeater list "R-L" at the same time, or individually.
q Enter the RX CAL (RX call sign) mode.
MENU ➪ RX CAL
q Push [MENU ] to enter the Menu screen.
w Rotate [DIAL] to select "RX CAL," e then push [ ](5).
w Rotate
q Push
e Push
Displays the CALLER's call sign
• The RX call sign screen is displayed.
w Rotate [DIAL] to select the desired record channel.
e Push [ ](5) several times to select the desired call sign
from CALLER, / (CALLER's note), CALLED, RXRPT1 and
RXRPT2.
First, program a MY call sign (Instruction manual: p. 36), then set it to the current call sign position (p. 47).
Next program the repeater list (p. 40). After that, follow this guide to access a D-STAR repeater
The CS-80/880*
repeater list. (Icom Global Site http://www.icom.co.jp/world/index.html) *Cloning cable is required.
Rotate
Push and hold for 1 sec.
Rotate
Calling
a specific station
(e.g. JG3YMK)
Push and hold
for 1 sec.
Rotate
Push .
q The previously selected screen
appears
w
e
Displays call record channel
(free download software) is helpful for programming call signs or the
cloning software
RPT1 selection
.
Displays the repeater
icon
UR call sign selection
.
Displays the UR call
sign icon
RPT2 selection
.
Display flushes
Displays the repeater
icon
r Push [u](6) to enter the copy select mode.
• The copy select screen is displayed.
t Rotate [DIAL] to select the desired call sign to be copied,
between "C ALL," "C UR01"–"C UR60" and "C R-L."
• The "C ALL" selection won't appear when either the station call sign
memory or the repeater list has no blank channel.
C ALL : Copy the caller call sign in "CALLER" into "UR" (station
call sign memory) and the repeater call sign in "RXRPT1"
/ "RXRPT2" into the repeater list. This selection won't ap-
pear when either the station call sign memory or the re-
peater list has no blank channel.
C UR01–
C UR60 : Copy the caller call sign in "CALLER" into "UR" (station
call sign memory). This selection appears when entering
the copy select mode (step r) from only "CALLER."
C R-L : Copy the repeater call sign in "RXRPT1" / "RXRPT2" into
the repeater list. This selection appears when entering
the copy select mode (step r) from only "RXRPT1" or
"RXRPT2."
y Push [ ](5) to copy the selected record's contents into the
appropriate call sign memory or repeater list.
u Push [MENU
Erase the call record contents
• Select "CLEAR" in step t, then push [ ](5) to erase the
selected channel contents.
NOTE:
• The access repeater scan is useful to find
an accessible repeater.
Start : Push and hold
Stop : Push once again.
• Group selection is available while selecting
UR call sign.
Group selection: Push
"GRP CQ" (CQCQCQ), "GRP RP" (Repeater
group) and "GRP UR" (UR call sign memo-
ries) momentarily appear in sequence.
A specific station can be selected, or "GRP UR"
in the group selection will appear, only when the
UR call sign memory has been programmed.
• The setting can be confirmed.
Confirmation: Push and hold
Rotate to display "UR," "R1," "R2," "MY"
and "FRQ" in sequence.
Push and hold for 1 sec. to toggle the
name display and call sign display.
Name display is available only for repeater call
signs that have programmed repeater names.
Push once again to exit the confirmation screen.
] to return to the operating display.
for 1 sec.
momentarily.
for 1sec.
A-6793-1EX