Memory/Call Channels; General Description; D Memory Channel Contents - Icom IC-E80D Instruction Manual

General description

The IC-E80D has 1050 memory channels, and 2 call chan-
nels. Memory channels include 50 scan edge memory chan-
nels for storage of often-used frequencies.
(25 pairs)
Also, 26 memory banks, A to Z, are available in each band for
storing groups of frequencies, etc. Up to 100 channels can be
assigned to a bank.

D Memory channel contents

The following information can be programmed into memory
channels:
• Operating frequency
(p. 23)
• Operating mode
(p. 25)
• Duplex direction
(+DUP or –DUP)
(p. 32)
• Subaudible tone encoder
squelch ON/OFF
(p. 150)
• Subaudible tone frequency
quency or DTCS code with polarity
• Scan skip information
(p. 108)
• Memory bank
(p. 95)
• Memory name
(p. 97)
• Tuning step
(p. 22)
• Call sign squelch or Digital code squelch*
• Station call sign*
(pgs. 37, 47)
• RPT1/RPT2 call sign*
(pgs. 38, 47)
*Available for DV mode operation only.

MEMORY/CALL CHANNELS

with a frequency offset
, tone squelch or DTCS
(p. 30)
, tone squelch fre-
(p. 119)
(pgs. 119, 120)
(p. 148)
NOTE:
Memory data can be erased by static electricity, electric
transients, etc.
In addition, they can be erased by malfunction and during
repairs.
Therefore, we recommend that memory data be written
down or be saved to a PC using the CS-80/880
(free download software).
SOFTWARE
9
1
2
3
4
5
6
CLONING
7
8
9
10
11
12
13
14
15
16
17
18
19
91