Memory/Call Channels; General Description; Selecting A Memory Channel - Icom IC-92A Instruction Manual

9

MEMORY/CALL CHANNELS

■ General description

The IC-92A/92AD has 850 memory channels in A band, 450
memory channels in B band, and 2 call channels in each
band. Memory channels in each bands including 50 scan
edge memory channels
frequencies, respectively.
And a total of 26 memory banks, A to Z, are available in
each bands for storing groups of frequencies, etc. Up to 100
channels can be assigned into a bank.
D Memory channel contents
The following information can be programmed into memory
channels:
• Operating frequency
• Operating mode
• Duplex direction
quency
(p. 31)
• Subaudible tone encoder
DTCS squelch ON/OFF
• Subaudible tone frequency
quency or DTCS code with polarity
• Scan skip information
• Memory bank
(p. 67)
• Memory name
(p. 70)
• Tuning step
(p. 18)
• Call sign squelch or Digital code squelch*
• Station call sign*
• RPT1/RPT2 call sign*
*Available for B band operation only.
72
for storage of often-used
(25 pairs)
(p. 18)
(p. 21)
with an offset fre-
(+DUP or –DUP)
, tone squelch or
(p. 107)
(p. 110)
, tone squelch fre-
(p. 107)
(pgs. 107, 111)
(p. 80)
(p. 110)
(p. 36)
(p. 41)

■ Selecting a memory channel

D Using [DIAL]— Programmed channels
q Push [MR] to select memory mode.
w Rotate [DIAL] to select the desired memory channel.
• Only programmed channels are displayed.
FM
146 010
A
B
MR
S.MW
D Using [DIAL]— All channels
q Push [MR] to select memory mode.
w Push and hold [S.MW](MR) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• "μ " indicator blinks.
e Rotate [DIAL] to select the desired memory channel.
• All channels are displayed.
• Push [VFO] to return to memory mode indication.
Appears
000 000
μ
Rotate [DIAL] to select
the memory channel.