Memory Bank Setting - Icom IC-E92D Instruction Manual

■ Memory bank setting

The IC-E92D has a total of 26 banks (A to Z). Regular mem-
ory channels, 000 to 799 (A band) / 000 to 399 (B band), are
assigned to the desired bank for easy memory management.
q Push and hold [S.MW](MR) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• Memory channel number blinks.
w Rotate [DIAL] to select the desired memory channel.
e Push [ ](2) or [ ](8) to select "BANK."
• Bank group and channel number is displayed if the selected
memory channel has already been previously assigned to a
bank.
[DIAL]
2
SCAN
B
MR
S.MW
8
TS
FM FM
14 145 870 870
r
µ 011 011
BANK :---- BANK :----
MNAME: MNAME:
SKIP :OFF SKIP :OFF
2 8
Push or
SCAN TS
14 145 870 870
µ 011 011
r
BANK BANK :---- :----
MNAME: MNAME:
SKIP :OFF SKIP :OFF
MEMORY/CALL CHANNELS
r Push [ ](4) or [ ](6) to select the desired bank group (A–
Z) or bank channel (0–99) digit.
[DIAL]
6
4
DUP M.NAME
t Rotate [DIAL] to select the bank group (from "A" to "Z") or
bank channel number (from "00" to "99").
145 870 14 870
r
BANK :C-05 BANK :C-05
MNAME: MNAME:
SKIP :OFF SKIP :OFF
Bank channel is
selected with [DIAL].
y Push and hold [S.MW](MR) for 1 sec. to assign the chan-
nel to the bank.
• Return to the previous indication.
9
145 870 14 870
µ 011 011
r
BANK BANK :C-00 :C-00
MNAME: MNAME:
SKIP :OFF SKIP :OFF
Bank group is selected
with [DIAL].
µ 011 011
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
75