Copying The Call Sign - Icom IC-E92D Instruction Manual

7
DV MODE OPERATION

■ Copying the call sign

D Copying the call sign memory contents
This function is convenient when or modifying a part of the
current call sign.
NOTE: Make sure that the "EDIT RECORD" item in DV
set mode is set to "AUTO" or "SELECT" in advance.
(p. 106)
➪
❮MENU screen❯
(Push [MENU/ ]) (Rotate [DIAL]
q During DV mode operation, enter call sign set mode.
• Pushing and holding [CS](9) for 1 sec. is also available to enter
call sign set mode.
• CALL SIGN screen is displayed.
w Rotate [DIAL]
†
to select "UR," "R1" or "R2" as desired,
†
then push [ ](5)
e Rotate [DIAL]
†
to select the desired call sign channel to
be copied.
• U01–U60 and R01–R60 are available.
48
❮CALL SIGN❯
†
, then push [
.
• When "AUTO" is set to "EDIT RECORD" item
r Push [ ](6) to select the call sign programming mode.
• A blank channel is selected automatically.
• The 1st digit of the selected call sign blinks.
‡
](5) .)
t Edit or modify the selected call sign as described in "Sta-
tion call sign programming"
programming"
y Push [ ](5) to store the edited/modifi ed call sign into the
selected blank channel.
NOTE: The message "FULL" is displayed when no blank
channel is available in station or repeater call sign mem-
ory.
In this case, select the desired call sign channel number
as described in step e is set to "EDIT RECORD" item" at
right.
YOUR CALL SIGN YOUR CALL SIGN
r U21 U21 AB AB
AAAAA
†AAAAA
:SET :SET CLR:CLR CLR:CLR
:SEL :SEL A/a:CHAR A/a:CHAR
:CUR :CUR 0:CQ 0:CQ
or "Repeater call sign
(p. 36)
.
(p. 41)