D Copying The Call Record Contents Into Call Sign Memory - Icom IC-E92D Instruction Manual

7
DV MODE OPERATION

D Copying the call record contents into call sign memory

This is a way to copy the call record contents
"RXRPT1" and "RXRPT2")
at the same time or individually.
"R2")
q Perform the steps q to e of "D Desired call record indi-
cation" to select the desired call record or call sign.
(p. 46)
w Push [ ](6) to select copy select mode.
• COPY SELECT screen is displayed.
COPY SELECT COPY SELECT
r
e Rotate [DIAL]
†
to select the desired call sign to be copied
from "ALL," "RXRPT1," "RXRPT2" and "CALLER."
• "ALL" selection won't appear when either station or repeater call
sign memory has no blank channel.
• When "ALL" is selected
➥ Push [ ](6) to copy the selected record's contents into
the appropriate call sign memory.
• Returns to RX CALL SIGN screen automatically.
50
("CALLER,"
into call sign memory
("UR," "R1" and
RX01 RX01
ALL ALL
:BACK :BACK :SEL :SEL
:LIST :LIST C:CURR C:CURR
• When "CALLER," "RXRPT1" or "RXRPT2" is
selected
z Push [ ](6) then rotate [DIAL]
dition of call sign memory channel selection to be copied
to from "AUTO" and "LIST SEL."
• "AUTO" selection won't appear when the appropriate call sign
memory has no blank channel.
• Go to step r when "AUTO" is selected.
COPY SELECT COPY SELECT
RX01 RX01
r
AUTO AUTO
LIST SEL LIST SEL
:BACK :BACK
:LIST :LIST
x Push [ ](6), then select the desired call sign memory
channel to copy to with [DIAL]
c Push [ ](6) to copy the call sign into the selected call
sign memory.
• Returns to RX CALL SIGN screen automatically.
r Push [MENU/
] to return to frequency indication.
[DIAL] ↔ [ ](2)/[ ](8)
†
†
to select the desired con-
:SEL :SEL
†
.